All pneumatic rifles are going to experience a leak or need some repairs throughout its life. It is the nature of the air gun. To make disassembly easier, we have the tools to help in the most effective way. Cape Fear Airguns is partnered with 910 Airguns Custom Parts (910 ACP) to provide the latest to the market in terms of specialty tools to make working on your FX Airgun easier!
Quickly disassemble the FX Impact without damaging the valve rod or hammer seat by using the FX Impact C1 Removal Tool.
Effortlessly remove and install your FX Airguns regulator piston with ease. Slip the tool on to the regulator piston, tighten the tool to lock in the piston, and pull the piston out of the action. The regulator piston will be reusable as the tool will not damage any part of the regulator when used correctly.
This tool was made for a single purpose, to remove the Plenum Plug (D18) on an FX Crown MK1 or MK2 without scratching the action. Prior service tool was a spanner wrench that would unfortunately scratch the action. We have solved this problem with the FX Crown Plenum Plug Removal Tool.
The FX Dynamic Block Valve Housing Tool is a specialized and durable tool designed for a specific purpose—to remove the valve housing on FX Dynamic Block-based rifles, like the FX Panthera. It addresses the challenge of removing the valve housing, which is a difficult task with a standard pin spanner wrench due to the plenum connection. This tool converts the pin spanner tool to a 4mm Hex, facilitating easier removal of the valve housing.
Easily remove and install your FX STX Barrel liner lock with this tool. Insert this tool into any tool that accepts 1/4" drive to quickly remove the liner lock from your STX barrel.
Only for .177 through .30 calibers. The .35cal uses a different style liner lock.