This unique Huma-Air regulator for the RAW HM1000x is specially designed as a “one on one” replacement regulator for the RAW rifles and solves all your original regulator problems instantly!
The regulator is very consistent over the total pressure range of the buddy bottle and it can be screwed into the action within a minute. The ultra compact build will add some extra CC’s of regulated volume to your rifle.
Made of stainless steel and vented to the atmosphere. You rifle does need to be equipped with the V-shaped fillport and pressure gauge connector.

Please note:

This regulator is only for the RAW HM1000X, not the HM1000 or other models. 

The benefits of the Huma-Air tuning regulator for the RAW HM1000x:

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• the compact build will give you some extra regulated volume
• Easy adjustable pressure setting.

When you order your Huma-Air Tuning Regulator for the RAW HM1000x you will receive:

• Your regulator preset on the test pressure. Fine adjustment needs to be done on the rifle
• Valve push pen what screws into the regulator to open up the valve of the buddy bottle (pre-installed)
• We will include a “Huma-Air regulated” breech sticker;
• Fitting instructions are currently not available

Pressure settings of the Huma-Air tuning regulator for the Raw HM1000x:

The regulator comes preset on the most common pressure setting.
The output pressure is stepless adjustable from about 80 up to 190 bar. An half turn contra clockwise of the regulator setscrew will give about 20 bar increase of pressure